2.2.0-test - ci-build
Publication Build: This will be filled in by the publication tooling
Active as of 2019-05-15 |
Definitions for the no-basis-Address data type profile.
Guidance on how to interpret the contents of this table can be found here
0. Address | |
2. Address.extension:official | |
Slice Name | official |
Control | 0..* |
Type | Extension(no-basis-address-official) (Extension Type: boolean) |
Alternate Names | offisiell adresse, user content |
4. Address.extension:urbanDistrict | |
Slice Name | urbanDistrict |
Definition | The name and number of the of the urban district of this address. |
Short | urban district information |
Control | 0..1 |
Type | Extension(no-basis-urban-district) (Extension Type: Coding) |
6. Address.extension:propertyInformation | |
Slice Name | propertyInformation |
Definition | Identification of a real property in Norway is defined using gårdsnummer, bruksnummer and kommunenummer. In addition real property can be rented out, the area of the real property that is rented is measured and is further identified by its festenummer. In addition some real property is split into sections identified by its seksjonsnummer |
Short | Real property identification |
Control | 0..* |
Type | Extension(no-basis-propertyinformation) (Complex Extension) |
8. Address.use | |
Definition | The purpose of this address. Mapping of values to other Norwegian CodeSystems is documented in the implementation guide. In general the address used for visiting the person should have use "home" and type "physical" or "both". The "official" flag can be either true or false. |
10. Address.type | |
Definition | Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. Mapping of values to other Norwegian CodeSystems is documented in the implementation guide. In general the address used for visiting the person should have use "home" and type "physical" or "both". The "official" flag can be either true or false. |
12. Address.city | |
Definition | When a postalcode is given the name of the city must be according to the official list of postalcodes used in Norway. The name of the city, town, village or other community or delivery center. |
Short | Poststed or city |
Alternate Names | by, poststed |
14. Address.district | |
Definition | Name of the county (norwegian "kommune"). The name of the administrative area (county). |
Short | name of "kommune" |
Alternate Names | kommune |
16. Address.district.extension | |
Slicing | This element introduces a set of slices on Address.district.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
18. Address.district.extension:municipalitycode | |
Slice Name | municipalitycode |
Definition | Coded value for municipality/county Norwegian kommune |
Short | Coded value for municipality/county Norwegian kommune |
Control | 0..1 |
Type | Extension(no-basis-municipalitycode) (Extension Type: Coding) |
20. Address.state | |
Definition | Name of the norwegian "fylke"). If fylkes-number is required "eiendomsinformasjon" should be used with koded kommune-number. Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (i.e. US 2 letter state codes). |
Short | norwegian "fylke" |
Alternate Names | fylke, Territory |
22. Address.postalCode | |
Definition | A postal code designating a region defined by the postal service. In Norway this is af four digit number defined by the norwegian postal service. |
Alternate Names | postnummer |
Guidance on how to interpret the contents of this table can be found here
0. Address | |
Definition | An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world. |
Short | An address expressed using postal conventions (as opposed to GPS or other location definition formats) |
Comments | Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). |
Control | 0..* This element is affected by the following invariants: ele-1 |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
2. Address.extension:official | |
Slice Name | official |
Definition | Defines the concept of an officially registered address in Norway. Usually this will be the adress registered in "Folkeregisteret" for persons or "Enhetsregisteret" for organizations. |
Short | The concept of an officially registered address |
Control | 0..* |
Type | Extension(no-basis-address-official) (Extension Type: boolean) |
Is Modifier | false |
Summary | false |
Alternate Names | offisiell adresse, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
4. Address.extension:urbanDistrict | |
Slice Name | urbanDistrict |
Definition | The name and number of the of the urban district of this address. |
Short | urban district information |
Control | 0..1 |
Type | Extension(no-basis-urban-district) (Extension Type: Coding) |
Is Modifier | false |
Summary | false |
Alternate Names | bydel, urban district |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. Address.extension:propertyInformation | |
Slice Name | propertyInformation |
Definition | Identification of a real property in Norway is defined using gårdsnummer, bruksnummer and kommunenummer. In addition real property can be rented out, the area of the real property that is rented is measured and is further identified by its festenummer. In addition some real property is split into sections identified by its seksjonsnummer |
Short | Real property identification |
Control | 0..* |
Type | Extension(no-basis-propertyinformation) (Complex Extension) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
8. Address.use | |
Definition | The purpose of this address. Mapping of values to other Norwegian CodeSystems is documented in the implementation guide. In general the address used for visiting the person should have use "home" and type "physical" or "both". The "official" flag can be either true or false. The purpose of this address. |
Short | home | work | temp | old | billing - purpose of this address |
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. |
Control | 0..1 |
Binding | The codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1 (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1 )The use of an address. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows an appropriate address to be chosen from a list of many. |
Example | <br/><b>General</b>:home |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. Address.type | |
Definition | Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. Mapping of values to other Norwegian CodeSystems is documented in the implementation guide. In general the address used for visiting the person should have use "home" and type "physical" or "both". The "official" flag can be either true or false. Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. |
Short | postal | physical | both |
Comments | The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). |
Control | 0..1 |
Binding | The codes SHALL be taken from AddressTypehttp://hl7.org/fhir/ValueSet/address-type|4.0.1 (required to http://hl7.org/fhir/ValueSet/address-type|4.0.1 )The type of an address (physical / postal). |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:both |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Address.city | |
Definition | When a postalcode is given the name of the city must be according to the official list of postalcodes used in Norway. The name of the city, town, village or other community or delivery center. The name of the city, town, suburb, village or other community or delivery center. |
Short | Poststed or cityName of city, town etc. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | Municpality, by, poststed |
Example | <br/><b>General</b>:Erewhon |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Address.district | |
Definition | Name of the county (norwegian "kommune"). The name of the administrative area (county). The name of the administrative area (county). |
Short | name of "kommune"District name (aka county) |
Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | County, kommune |
Example | <br/><b>General</b>:Madison |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Address.district.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Address.district.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
18. Address.district.extension:municipalitycode | |
Slice Name | municipalitycode |
Definition | Coded value for municipality/county Norwegian kommune |
Short | Coded value for municipality/county Norwegian kommune |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(no-basis-municipalitycode) (Extension Type: Coding) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
20. Address.state | |
Definition | Name of the norwegian "fylke"). If fylkes-number is required "eiendomsinformasjon" should be used with koded kommune-number. Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (i.e. US 2 letter state codes). Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). |
Short | norwegian "fylke"Sub-unit of country (abbreviations ok) |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | Province, Territory, fylke |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Address.postalCode | |
Definition | A postal code designating a region defined by the postal service. In Norway this is af four digit number defined by the norwegian postal service. A postal code designating a region defined by the postal service. |
Short | Postal code for area |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | Zip, postnummer |
Example | <br/><b>General</b>:9132 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Address | |
Definition | An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world. |
Short | An address expressed using postal conventions (as opposed to GPS or other location definition formats) |
Comments | Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). |
Control | 0..* This element is affected by the following invariants: ele-1 |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
2. Address.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
4. Address.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Address.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. Address.extension:official | |
Slice Name | official |
Definition | Defines the concept of an officially registered address in Norway. Usually this will be the adress registered in "Folkeregisteret" for persons or "Enhetsregisteret" for organizations. |
Short | The concept of an officially registered address |
Control | 0..* |
Type | Extension(no-basis-address-official) (Extension Type: boolean) |
Is Modifier | false |
Summary | false |
Alternate Names | offisiell adresse, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
8. Address.extension:urbanDistrict | |
Slice Name | urbanDistrict |
Definition | The name and number of the of the urban district of this address. |
Short | urban district information |
Control | 0..1 |
Type | Extension(no-basis-urban-district) (Extension Type: Coding) |
Is Modifier | false |
Summary | false |
Alternate Names | bydel, urban district |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
10. Address.extension:propertyInformation | |
Slice Name | propertyInformation |
Definition | Identification of a real property in Norway is defined using gårdsnummer, bruksnummer and kommunenummer. In addition real property can be rented out, the area of the real property that is rented is measured and is further identified by its festenummer. In addition some real property is split into sections identified by its seksjonsnummer |
Short | Real property identification |
Control | 0..* |
Type | Extension(no-basis-propertyinformation) (Complex Extension) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
12. Address.use | |
Definition | The purpose of this address. Mapping of values to other Norwegian CodeSystems is documented in the implementation guide. In general the address used for visiting the person should have use "home" and type "physical" or "both". The "official" flag can be either true or false. |
Short | home | work | temp | old | billing - purpose of this address |
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. |
Control | 0..1 |
Binding | The codes SHALL be taken from AddressUse (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1 )The use of an address. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows an appropriate address to be chosen from a list of many. |
Example | <br/><b>General</b>:home |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
14. Address.type | |
Definition | Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. Mapping of values to other Norwegian CodeSystems is documented in the implementation guide. In general the address used for visiting the person should have use "home" and type "physical" or "both". The "official" flag can be either true or false. |
Short | postal | physical | both |
Comments | The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). |
Control | 0..1 |
Binding | The codes SHALL be taken from AddressType (required to http://hl7.org/fhir/ValueSet/address-type|4.0.1 )The type of an address (physical / postal). |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:both |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
16. Address.text | |
Definition | Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts. |
Short | Text representation of the address |
Comments | Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | A renderable, unencoded form. |
Example | <br/><b>General</b>:137 Nowhere Street, Erewhon 9132 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
18. Address.line | |
Definition | This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. |
Short | Street name, number, direction & P.O. Box etc. |
Control | 0..* |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:137 Nowhere Street |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
20. Address.city | |
Definition | When a postalcode is given the name of the city must be according to the official list of postalcodes used in Norway. The name of the city, town, village or other community or delivery center. |
Short | Poststed or city |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | Municpality, by, poststed |
Example | <br/><b>General</b>:Erewhon |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
22. Address.district | |
Definition | Name of the county (norwegian "kommune"). The name of the administrative area (county). |
Short | name of "kommune" |
Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | County, kommune |
Example | <br/><b>General</b>:Madison |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
24. Address.district.id | |
Definition | unique id for the element within a resource (for internal references) |
Short | xml:id (or equivalent in JSON) |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
26. Address.district.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Address.district.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
28. Address.district.extension:municipalitycode | |
Slice Name | municipalitycode |
Definition | Coded value for municipality/county Norwegian kommune |
Short | Coded value for municipality/county Norwegian kommune |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(no-basis-municipalitycode) (Extension Type: Coding) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
30. Address.district.value | |
Definition | The actual value |
Short | Primitive value for string |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Max Length: | 1048576 |
32. Address.state | |
Definition | Name of the norwegian "fylke"). If fylkes-number is required "eiendomsinformasjon" should be used with koded kommune-number. Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (i.e. US 2 letter state codes). |
Short | norwegian "fylke" |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | Province, Territory, fylke |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
34. Address.postalCode | |
Definition | A postal code designating a region defined by the postal service. In Norway this is af four digit number defined by the norwegian postal service. |
Short | Postal code for area |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | Zip, postnummer |
Example | <br/><b>General</b>:9132 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
36. Address.country | |
Definition | Country - a nation as commonly understood or generally accepted. |
Short | Country (e.g. can be ISO 3166 2 or 3 letter code) |
Comments | ISO 3166 3 letter codes can be used in place of a human readable country name. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
38. Address.period | |
Definition | Time period when address was/is in use. |
Short | Time period when address was/is in use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Requirements | Allows addresses to be placed in historical context. |
Example | <br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" } |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |